You are here > The pictograms used on the site Standard EN 420 stipulates the basic requirements for all protective gloves: Identification of the manufacturer, composition and non-hazardous materials (Ph as neutral as possible), dexterity suited to the intended use, packaging and storage maintenance instructions and instructions for use. The following standards complement standard EN 420: 3121 En 388: Mechanical risks category 2 Specific requirements for solid gloves intended for hazardous work. 4 laboratory tests establish the performance levels for these gloves: A) = Abrasion resistance from 0 to 4, B) = Blade cutting resistance from 0 to 5, C) = Tear resistance 0 to 4, D) = Puncture resistance from 0 to 4. Heat resistance standard. EN374-2 EN374-3 EN 374: micro-organic and chemical risks, category 3 EN 374-2: Protection against micro-organic hazards. A test checks impermeability to air and water. EN 374-3: Protection against chemical hazards. A measurement is made of the time necessary for a hazardous product to penetrate the material and enter into contact with the skin. EN 374: MICRO-ORGANIC AND CHEMICAL RISKS 4 laboratory tests are used to determine the performance level. EN 511: risks of exposure to cold. (tests of cold penetration, contact cold and convective cold) Standard for high visibility clothing and articles, refers to the type and surface of the reflective material. The materials (retro-reflective, fluorescent or combined) must be clearly visible in all hazardous environments and all light conditions. Reflective clothing is categorised into 3 classes with increasingly stringent demands. Weather conditions Clothing designed for open air activities in warm dry weather. Clothing designed for open air activities in cloudy weather. Clothing designed for open air activities in damp weather. Clothing designed for open air activities in rainy weather. Clothing designed for open air activities in the snow. Types d'utilisations Clothing designed for stationary activities, good warmth retention. Clothing designed for mobile activities, optimal breathability. Clothing designed for both stationary and mobile activities. Accessories Reversible garment (can be worn inside out) Multi-pocket garment (good for walking, hunting, etc.) Garment fitted with a pen pocket. Garment fitted with a phone pocket. Garment fitted with an inside breast pocket. Easy to mark on the back thanks to the zip fastener at the bottom inside the garment.. 2 in 1 garment (parka with removable lining or removable sleeves...) 3 in 1 garment (parka with removable lining or removable sleeves...) Colours available for high visibility clothing Colours available for high visibility clothing. Miscellaneous Pictogram indicating the gloves available on staples. However, on request, all the models may also be mounted on staples. To find out about the conditions, contact us.